• Garage One-Day System kit: polyurea base coat, polyaspartic clear, box of flake and application tools
  • One-day flake garage floor
  • Garage floor with solid color finish
1 3

Garage One-Day System

Garage One-Day System

Made in the USA
$854.99
$854.99
Sale Sold out
Free shipping on orders over $500. Shipping policy.
Finish
Size
Color
Light Gray solid color for epoxy floors, color swatch
Color swatch
Light Gray solid color on an epoxy garage floor, rendering
Rendering. Real floors vary with the pour.

Light GraySolid color. Screens show color differently.

Add to your kit (optional)
Different size, larger area or a custom spec?Request a quote
Call (877) 703-7699
The whole floor installs in one day, tools included. The fast-cure products give you minutes, not hours, to work, so this system is for experienced installers.
Morning: prep the slab, roll on the fast-cure base coat and broadcast the flake.
Afternoon: scrape, then roll on the clear topcoat.
Walk on it the next day. Park on it two days after the clear coat. Why this beats a big-box kit · How to prep your floor

The whole floor goes down in one day. Walk on it the next day. Park on it two days after the clear coat. Full Flake: B-933 fast-cure polyurea base coat, a full flake broadcast, and T-444X polyaspartic clear, with the full tool kit. Solid Color: two coats of T-444X polyaspartic, the first tinted with a pigment pack, the second clear, with the full tool kit.

There is no Starter version of this floor. A polyurea base has to be topcoated the same day.

What's in the box

Full Flake

  • 1-Car (up to 350 sq ft): 1 x B-933 polyurea 2.5 gal kit + 1 x 40 lb box of flake + 1 x T-444X 2 gal clear + tool kit
  • 2-Car (up to 700 sq ft): 2 x B-933 polyurea 2.5 gal kit + 2 x 40 lb box of flake + 2 x T-444X 2 gal clear + tool kit
  • 3-Car (up to 1,050 sq ft): 3 x B-933 polyurea 2.5 gal kit + 3 x 40 lb box of flake + 3 x T-444X 2 gal clear + tool kit
  • 4-Car (up to 1,400 sq ft): 4 x B-933 polyurea 2.5 gal kit + 4 x 40 lb box of flake + 4 x T-444X 2 gal clear + 2 tool kits
  • Up to 1,750 sq ft: 5 x B-933 polyurea 2.5 gal kit + 5 x 40 lb box of flake + 5 x T-444X 2 gal clear + 2 tool kits
  • Up to 2,100 sq ft: 6 x B-933 polyurea 2.5 gal kit + 6 x 40 lb box of flake + 6 x T-444X 2 gal clear + 2 tool kits

Solid Color

  • 1-Car (up to 350 sq ft): 1 x T-444X 2 gal kit with pigment pack (base) + 1 x T-444X 2 gal kit clear (top) + tool kit
  • 2-Car (up to 700 sq ft): 2 x T-444X 2 gal kit with pigment pack (base) + 2 x T-444X 2 gal kit clear (top) + tool kit
  • 3-Car (up to 1,050 sq ft): 3 x T-444X 2 gal kit with pigment pack (base) + 3 x T-444X 2 gal kit clear (top) + tool kit
  • 4-Car (up to 1,400 sq ft): 4 x T-444X 2 gal kit with pigment pack (base) + 4 x T-444X 2 gal kit clear (top) + 2 tool kits
  • Up to 1,750 sq ft: 5 x T-444X 2 gal kit with pigment pack (base) + 5 x T-444X 2 gal kit clear (top) + 2 tool kits
  • Up to 2,100 sq ft: 6 x T-444X 2 gal kit with pigment pack (base) + 6 x T-444X 2 gal kit clear (top) + 2 tool kits

The tool kit: 18 inch roller frame and two covers, 18 inch notched squeegee, mix wand, chip brush, spiked shoes, mixing bucket, gloves and safety glasses. Floors of 1,400 sq ft and up get two tool kits.

What it covers

  • 1-Car: up to 350 sq ft
  • 2-Car: up to 700 sq ft
  • 3-Car: up to 1,050 sq ft
  • 4-Car: up to 1,400 sq ft
  • Larger floors: up to 1,750 sq ft or up to 2,100 sq ft

Coverage figures assume the recommended thickness on a properly profiled slab. Rough or porous concrete uses more. Order the next size up if your floor is at the top of a range. Floors over 2,100 sq ft: call (877) 703-7699.

Before you start, check the floor

  • Moisture. Tape a 2 ft square of plastic sheet to the slab, seal the edges, wait 24 hours. Water under the plastic or a dark spot means the slab is damp. Prime it with P-409 Moisture Vapor Primer first, or the floor will lift.
  • Cracks and spalls. Fill cracks with R-818 Epoxy Crack Filler. Rebuild spalls and holes with R-343 Concrete Quick Fix. Fill saw-cut and expansion joints with R-830 Flexible Joint Sealant. How to: how to use epoxy crack filler.
  • Oil stains. If a stain comes back a day after degreasing, the oil is in the slab. Prime those spots with P-820 Oil Stop Primer.
  • Profile. Grind or acid-etch the concrete so it feels like 120-grit sandpaper. Coatings bond to profile, not to smooth concrete.
  • Temperature. Slab and air between 60 and 90°F for epoxy (45°F for the cold-weather products and polyurea). Humidity under 85%.

How it goes down

  • Morning: repair, grind or etch, vacuum. Roll the polyurea base (or the tinted polyaspartic), broadcast flake while wet.
  • Three to six hours later: scrape and vacuum loose flake, roll the T-444X clear.
  • Next day, 24 hours after the clear coat: walk on it.
  • Two days after the clear coat at 70°F: park on it. Cold weather adds time, up to 7 days.

The full walkthrough, with section planning and batch sizes: how to install a one-day polyaspartic garage floor.

Working time

  • B-933 polyurea: 15 to 25 minutes per batch, 4:1 mix. Mix small batches, and work with two people for anything over one bay.
  • T-444X: 10 to 20 minutes usable per batch, 1:1 mix. Mix only what you can roll out.

Not included

  • Primer: not needed on ground or etched concrete that passed the moisture test.
  • Crack filler and spall repair: R-818 and R-343 if your inspection finds them.

Why choose a one-day polyaspartic garage floor coating

  • It is fast. One day of work. Walk on it the next day and park on it two days after the clear coat.
  • It holds up in sunlight. The polyaspartic clear coat is UV-stable.
  • It works in a cooler garage. This kit can go down at 50°F. Epoxy needs 60°F.

How thick the one-day floor goes on

  • Full flake base coat. B-933 polyurea is 99% solids. One 2.5 gal kit covers one car bay under a flake broadcast.
  • Clear coat. T-444X polyaspartic goes on at 5 to 12 mils wet. Thicker than 12 mils, it bubbles.
  • Solid color. Two coats of T-444X. The first is tinted with a pigment pack. The second is clear.

One-Day System or Garage Pro System

  • Pick the One-Day System when you need the garage back fast, or the slab is too cold for epoxy.
  • Pick the Garage Pro System when you want more time to work. Its epoxy base coat gives you 30 to 50 minutes a batch. The polyurea base coat gives you 15 to 25.
  • Metallic floors are in the Garage Pro System. See metallic epoxy floor kits.
  • All five kits side by side: epoxy floor kit buying guide.

The full comparison is in epoxy vs polyaspartic. The One-Day System comes in 10 flake blends and 11 solid colors, all on the epoxy floor colors page. Additional flake color options are available on request.

Garage One-Day System FAQ

Can a garage floor coating really go down in one day?

Yes. On a full flake floor the base coat is ready for the clear coat in three to six hours, so both go on the same day.

When can I park on it?

Walk on it 24 hours after the clear coat. Park on it two days after the clear coat at 70°F. Cold weather adds time, up to 7 days.

Is polyaspartic harder to apply than epoxy?

It sets faster, so you mix small batches and work in sections. Bring a helper for anything over one bay, and use your free 20-minute consultation before you mix. Call (877) 703-7699. If we miss you, we call back within an hour.

Do I need a primer?

Not on ground or etched concrete that passed the moisture test. See how to test a concrete floor for moisture.

Technical documents

View full details