FAQ
The questions we hear most. Anything else, call a coating expert at (877) 703-7699.
How much do I need for my floor?
Measure the length and width of the floor and multiply them. That is your square footage. Our systems are sized to it:
- Garage systems: 1-Car up to 350 sq ft, 2-Car up to 700, 3-Car up to 1,050, 4-Car up to 1,400, then up to 1,750 and up to 2,100
- Basement & Indoor: up to 350 through up to 2,100 sq ft, in steps of 350
- Commercial: up to 2,000 or up to 5,000 sq ft
Pick the size at or above your number. A typical 2-car garage is 400 to 500 sq ft, so it takes the 2-Car size. Rough or porous concrete soaks up more material, so if you are close to the top of a range, go up one size. Coverage for single products is listed on each product page. Build my kit will size it for you, or call and we will.
Can I coat over old epoxy, tile, oil-based paint, plywood or particle board?
- Old epoxy: yes, if it is still well bonded. Grind or sand the whole surface until it is dull and scratched, then vacuum. Anything peeling or lifting has to come off first.
- Oil-based paint: no. Grind it off down to bare concrete. A new coating is only as strong as what is under it.
- Tile: taking it up is best. A coating bonds best to bare concrete, and there is no way to test for moisture under tile. If the tile is staying, grind it flat to the grout lines and roll a flexible primer coat first. See can you epoxy over tile?
- Plywood: yes, if the subfloor is sound, rigid and dry. It takes a primer made for wood and a flexible base coat, so call us and we will put the right products together. See can you epoxy over wood or plywood?
- Particle board: no. It swells with moisture and moves, and the coating will crack.
Metallic, solid color or flake: which should I pick?
- Full flake is a color coat covered edge to edge with vinyl chips. It hides flaws in the concrete, adds grip and is the easiest to get right on a first floor. 10 blends.
- Solid color is one clean, even color. It shows flaws in the concrete more, so prep matters more. 12 colors.
- Metallic is a pigmented clear coat over a black base that you work into swirls. Every floor is one of a kind. It takes the most care to apply and is slick when wet, so add anti-slip to the topcoat. 21 colors.
Call and we will describe any color or blend in detail.
Is the topcoat clear? Do you sell non-slip grit?
Yes, the topcoats are clear. T-521 can also be tinted with a pigment pack.
For grip, add A-HWS Anti-Slip Additive (tabular alumina). Stir it into the topcoat before you roll it. One pint treats a 1.5 gallon topcoat kit, about one car bay.
How long do I have once it is mixed? Is it self-leveling?
Mix Part A into Part B for about 5 minutes with a drill mixer. You then have about 35 minutes to work with it at 70°F, less when it is hot. Pour the mixed material onto the floor right away. Left in the bucket, it heats up and sets faster.
It flows out and smooths roller marks, but you still spread it. Pull it out with the notched squeegee, then back-roll it. The metallic clear coat flows more than the others.
How soon can I walk and park on it?
- Garage One-Day: walk on it the next day, park on it two days after the clear coat.
- Garage Starter: walk on it the day after the last coat.
- Garage Pro, Basement & Indoor and Commercial: walk on it on the third day, park after 4 to 7 days.
These times are at 70°F. Cold weather slows all of them down.
Do you have a store near me? How long does shipping take?
We sell online only. Orders ship within 2 business days and usually arrive 3 to 4 days after that. Shipping is free on orders over $500. We ship anywhere in the US.
How do I prep my floor?
Test for moisture, clean, grind, repair cracks and vacuum. Plan on one day. The full steps are in How to Prep a Garage Floor for Epoxy.