EpoxyPRO vs ArmorPoxy, ArmorGarage, Spartan and Legacy: Online 100% Solids Epoxy Kits Compared

ArmorPoxy ArmorClad and ArmorGarage Armor Chip are 100% solids epoxies applied at 8 to 12 mils per their data sheets, at $1.17 to $1.90 per sq ft. Spartan's HDPRO base is 85% solids by volume at 6 to 12 mils, $375.63 for the epoxy alone. Legacy Industrial publishes 100% solids and about 130 sq ft per gallon and little else. The EpoxyPRO Garage Pro Full Flake kit is a 100% solids base coat at about 14 mils in one coat, a 40 lb flake box per bay, T-444X polyaspartic clear and the tool kit, at $1,961.99 for a 2-car floor, $2.80 per sq ft at 700 sq ft. The differences that matter are mils per coat, pounds of flake, topcoat chemistry and what the price includes.

Five online epoxy kits side by side

Competitor figures come from each company's technical data sheet (TDS), kit page or FAQ, checked October 15, 2026, with kit prices rechecked November 3, 2026, and are labeled by source. "Not published" means we could not find the number in those documents. Our figures are from the product pages; data sheets are available on request. Prices as of November 2026.

	ArmorPoxy ArmorClad	ArmorGarage Armor Chip	Spartan Epoxies HDPRO 2-car kit	Legacy Industrial SD Epoxy Coat Kit	EpoxyPRO Garage Pro Full Flake
Base coat	2-part 100% solids epoxy, 2:1 (TDS)	2-part 100% solids epoxy, 2:1 (TDS)	2-part epoxy, 2:1; 93% solids by weight, 85% by volume (TDS)	100% solids epoxy, "contains no solvents" (product page)	B-707 High Build Epoxy, 2-part 100% solids, 2:1
Coverage at stated mils	115 to 170 sq ft per gal at 8 to 12 mils (TDS); Master Kit "600 sq ft," sized for a 450 to 500 sq ft garage with margin (help center)	115 to 170 sq ft per gal at 8 to 12 mils (TDS); kit "600 sq ft"	133 to 267 sq ft per gal at 6 to 12 mils; 2-car kit "399 sq ft at 12 mils" (TDS, kit page)	About 130 sq ft per gal (product page); mils not published	About 115 sq ft per gal at 14 mils; 2-car kit covers up to 700 sq ft
Dry film, one coat	8 to 12 mils (TDS)	8 to 12 mils (TDS)	6 to 12 mils (TDS)	Not published	About 14 mils
Working time	20 to 30 min, pot life 30 min (TDS); 15 to 20 min (kit page)	20 to 30 min, pot life 30 min (TDS)	35 to 55 min for 1.5 gal (TDS); 20 to 35 min (kit page)	Not published	30 to 50 min per 1.5 gal batch at about 70°F
Recoat window	12 hr min, 24 hr max (TDS)	12 hr min, 24 hr max (TDS)	10 to 14 hr (TDS)	Not published	8 to 12 hr
Walk-on	Next day (kit FAQ)	4 to 6 hr after topcoat (kit pages); 24 hr light foot traffic (topcoat TDS)	12 to 16 hr light foot traffic (TDS)	Not published	Day 3, the day after the clear coat
Drive-on	48 to 72 hr (TDS); 72 hr (kit specifications); 4 to 5 days (kit FAQ)	48 to 72 hr (TDS); 2 to 3 days (Chip page); 3 to 4 days (Granite page)	Not published; "full cure of 2 to 7 days" (TDS)	Not published	4 to 7 days
Application temperature	50 to 90°F (TDS)	Not published	60 to 90°F, RH under 85% (TDS)	Not published	60 to 90°F; 45°F with B-181 cold-weather base
Topcoat in kit	Optional, three choices: water-based acrylic urethane, 2-part polyurethane, or polyaspartic (kit page)	Yes: 2 coats water-based acrylic urethane; "Military Grade" add-on +$115 to +$850 by size (kit pages)	No; urethane add-ons; polyaspartic sold separately (kit page). TDS: base is "not UV color stable"	Optional: polyurea clear $189 to $1,277, or water-based clear $94 to $567 (product page)	Yes: T-444X polyaspartic, 2 gal per bay, UV-stable
Flake in kit	3 lb per 300 sq ft; 6 lb per 600 sq ft, "Medium Broadcast" (no-topcoat kit page)	6 lb, "70-75%" coverage (Chip page); Granite kit 18 lb per 550 sq ft, "90-95%"	Add-on: 5 lb +$30 to 45 lb +$329 (kit page)	Optional: 10 lb +$99, 15 lb +$149, 20 lb +$198 (product page)	40 lb box per 350 sq ft, full broadcast
Tools in kit	Etch, 6 gal bucket, power mixer, cut-in brush, gloves, roller pad, squeegee, non-skid additive (Master Kit page)	Squeegee, etch, 4 rollers, mixing paddle, gloves, brush, spiked soles, non-slip additive (Granite page)	Mixer, 9 in roller frame and cover, 3 in brush; spiked shoes +$34.99 and squeegee +$24.99 are "Required for Job" (kit page)	Not published	18 in roller frame and 2 covers, 18 in notched squeegee, mix wand, chip brush, spiked shoes, bucket, gloves, safety glasses
2-car price, configured as sold	Kits $419 to $2,489 by configuration; Master Kit price varies by topcoat choice; FAQ: $1.40 to $1.90 per sq ft	$699 for 600 sq ft with 6 lb flake and standard topcoat; Granite $925 for 550 sq ft with 18 lb (kit pages)	$375.63 base only (sale, from $520.25); $764.61 with 45 lb flake, spiked shoes and squeegee, before topcoat (our arithmetic)	$219 to $2,199 range; per-size price not shown	$1,961.99 for up to 700 sq ft, full flake, polyaspartic clear, tools. Solid color $1,270.99
Price per sq ft (our arithmetic)	$1.40 to $1.90 (ArmorPoxy FAQ)	$1.17 (Chip, 600 sq ft); $1.68 (Granite, 550)	$0.94 base only; $1.92 before topcoat	Not published	$2.80 full flake; $1.82 solid color
Warranty as published	"Lifetime limited" on the no-topcoat kit page; warranties page says terms vary, request before purchase	10-year "New Look" wear warranty on Granite and on the Military Grade topcoat; FAQ calls "lifetime" warranties "mostly marketing hype"	None published; TDS limits liability to the product's price	Not published	None
Phone support hours	Not published	Not published	Not published	Not published	(877) 703-7699, Monday to Saturday, 8am to 6pm ET; free 20-minute consultation with any purchase
VOC	Under 10 g/L (TDS)	Under 10 g/L (TDS)	Under 95 g/L mixed (TDS)	"Low VOC," no number	B-707 under 2 g/L; T-444X under 95 g/L

Where the kits agree

Four of the five are 100% solids epoxy base coats. Each company tells you to grind or etch the concrete, test for moisture, and keep the epoxy out of direct sun. On a sound, ground slab, each of them is a real floor. Spartan's HDPRO is the one high-solids base in the group; at 85% by volume, a 12 mil wet coat dries thinner, and its own TDS says to put an aliphatic urethane over it because the base is "not UV color stable." Legacy's pages give too little to judge beyond solids and coverage.

Where the published figures conflict (ArmorPoxy's three drive-on times, ArmorGarage's three, Spartan's two working times), the table lists every number. Plan around the TDS figure.

What separates the Garage Pro kit

• Flake. A full broadcast takes about 40 lb per 350 sq ft, and that is what ships per bay, against 6 to 18 lb in the ArmorGarage and ArmorPoxy kits and add-on flake from Spartan and Legacy. With a full broadcast the base coat color disappears under the chips and the texture is even across the floor.
• Clear coat over flake. T-444X is a polyaspartic, 83% solids by volume, UV-stable, 133 to 320 sq ft per gallon at 5 to 12 mils wet. The standard ArmorGarage and ArmorPoxy clears are water-based acrylic urethanes; ArmorGarage's TDS puts its topcoat at up to 1,100 sq ft per gallon, which is a thin film. ArmorPoxy offers a polyaspartic as an upgrade.
• Colors. B-707 comes in 12 colors, with the base coat matched to the flake blend on Full Flake kits. All of them are on epoxy floor colors.
• Cold weather and one day. Below 60°F, B-181 Quick Set High Build Epoxy cures to 45°F and recoats in 6 to 8 hr. For a floor that has to be back in use fast, the Garage One-Day System uses a B-933 polyurea base, rated to 40°F, under T-444X, and takes a car two days after the clear coat.

Where the Garage Pro kit costs more

At $2.80 per sq ft for full flake, the Garage Pro 2-car kit is above ArmorGarage's $1.17 Chip kit and $1.68 Granite kit, and above Spartan's $1.92 before topcoat. The gap is the 80 lb of flake instead of 6 to 18 lb, the polyaspartic clear instead of an acrylic urethane, and the 14 mil base. The solid-color Garage Pro 2-car kit, with T-521 water-based polyurethane on top and no flake, is $1,270.99, or $1.82 per sq ft, inside the ArmorPoxy FAQ's own $1.40 to $1.90 range. If the lowest price for a 100% solids epoxy with a topcoat in the box is the goal, the ArmorGarage Chip kit is the one to look at. Check the kit sizing too: ArmorPoxy's "600 sq ft" Master Kit is sized for a 450 to 500 sq ft garage with margin, by its own help center, while our 2-car kit is rated to 700 sq ft at 14 mils.

How to compare any two kits

1. Divide the kit price by the kit's stated square footage, then check the mils that square footage assumes. A 600 sq ft kit at 8 mils and a 350 sq ft kit at 14 mils hold about the same gallons of epoxy.
2. Add the topcoat if it is optional, and note its chemistry. Water-based acrylic urethane, 2-part polyurethane and polyaspartic are three different films.
3. Add the flake to a full broadcast: 40 lb per 350 sq ft.
4. Add the tools the kit page calls required but does not include.
5. Read the TDS cure times, and plan on the longest drive-on figure the company publishes.

The buying guide walks through sizing in detail: epoxy floor kit buying guide. The install itself is in how to epoxy a garage floor. If one of these kits is already on your floor and lifting, start with how to recoat a peeling garage floor.

Common questions

What is the best garage floor epoxy

Any 100% solids epoxy base at 8 mils or more under a UV-stable clear, over ground concrete, is a sound floor. ArmorPoxy, ArmorGarage and EpoxyPRO all publish 100% solids. Compare mils per coat (8 to 12 against about 14), flake in the box (6 to 18 lb against 40 lb per bay) and the clear coat chemistry, acrylic urethane or polyaspartic.

What ArmorPoxy publishes about ArmorClad

Its epoxy TDS lists 115 to 170 sq ft per gallon at 8 to 12 mils, 20 to 30 minutes working time, recoat in 12 to 24 hr and vehicle traffic in 48 to 72 hr. The kit pages and FAQ give drive-on as 72 hr and 4 to 5 days. The TDS also states the epoxy "yellows with prolonged exposure to sunlight," which is why the topcoat options exist.

What does 100% solids epoxy mean

Nothing in the can evaporates, so the wet film you spread is the dry film you keep. Spartan's HDPRO is 85% solids by volume, so a 12 mil wet coat dries to less; B-707 spread at 14 mils stays at 14 mils. How the clears differ is in epoxy vs polyaspartic vs polyurea.

What Legacy Industrial publishes about its epoxy kit

Its SD Epoxy Coating page publishes 100% solids and about 130 sq ft per gallon. Pot life, cure times, film thickness and application temperature are not on the product pages. Ask for the TDS before you order from any of these companies, ours included.

Size your floor at the kit builder, or call (877) 703-7699 and we will go through it with you.

Sources

• ArmorPoxy ArmorClad kit page: https://armorpoxy.com/armorclad-epoxy-floor-kit
• ArmorPoxy ArmorClad kit, no topcoat: https://armorpoxy.com/armorclad-epoxy-floor-kit-no-topcoat
• ArmorPoxy help center, ArmorClad coverage: https://help.armorpoxy.com/knowledge/coverage-armorclad-epoxy
• ArmorPoxy ARM707X-RM 100% Solids Epoxy TDS and Ultraglaze topcoat TDS (hosted by Lowe's): https://pdf.lowes.com/productdocuments/5815e4d7-8875-41fa-8e89-3e393bf36a14/71755820.pdf
• ArmorPoxy warranties page: https://armorpoxy.com/warranties/
• ArmorGarage Armor Chip / Armor Granite Epoxy Floor Kit TDS: https://armorgarage.com/content/Armor%20Chip-%20Granite-Epoxy-Floor-Kit_TDS.pdf
• ArmorGarage Armor Granite kit page: https://armorgarage.com/armor-granite-garage-floor-coating-epoxy-kit/
• ArmorGarage Armor Chip kit page: https://armorgarage.com/archhakit.html
• ArmorGarage FAQ: https://armorgarage.com/faq/
• Spartan Epoxies 2-car Garage Floor Epoxy Kit, High Solids: https://www.spartanepoxies.com/garage-floor-epoxy?product_id=90
• Spartan Epoxies HDPRO TDS: https://www.spartanepoxies.com/tech-data/hdpro-tds.pdf
• Legacy Industrial SD Epoxy Coat Kit: https://www.legacyindustrial.co/products/sd-epoxy-garage-kit/
• Legacy Industrial SD Epoxy Coating: https://www.legacyindustrial.co/products/sd-epoxy-coating/
• EpoxyPRO figures: Garage Pro System, Garage One-Day System, B-707, B-181, B-933, T-444X, A-Chips Decorative Flake and Application Tool Kit product pages, November 2026. Data sheets available on request.