T-444X Polyaspartic Coating, Gloss

UV-stable, hardest-wearing clear in the line. 1:1 mix and 10 to 20 minutes of usable working time make it the polyaspartic a careful DIYer can apply. Walk on it next day. Add A-PAP pigment for a colored finish.

What's in the box

• 2 Gal Kit: 1 gal A + 1 gal B (1:1)
• 10 Gal Kit: 5 gal A + 5 gal B
• Each kit is two parts. Mix Part A into Part B completely before you pour.

What it covers

• 133 to 320 sq ft per gallon at 5 to 12 mils wet. Over 12 mils it bubbles.
• 2 Gal Kit: one car bay of clear over flake

Coverage figures assume the recommended thickness on a properly profiled slab. Rough or porous concrete uses more. Order the next size up if your floor is at the top of a range.

Use it when

• Clear over chips, quartz or color where UV stability and abrasion matter
• Garages, kitchens, countertops, retail
• You want polyaspartic performance with a manageable working window

Pick something else if

• You need to walk on it the same evening (that is T-344)
• Applied thick (>12 mils wet bubbles)
• Poor ventilation

Specs

• Solids: 84% wt / 83% vol
• Mix ratio: 1:1 by volume
• Working time (min): > 120 to gel; 10-20 usable
• Tack free (hr): 4-8
• Recoat (hr): 6-9
• Foot traffic: 24 hr
• Full cure: 2-7 days
• Apply at (F): 50-90 (RH < 85%)
• VOC: < 95 g/l

Data sheet available on request. Test a small area first.