T-359 High Solids High Wear Urethane

Three-part high-solids urethane wear coat: Part A, Part B and Part C, a fine aggregate that gives a semi-gloss, high-traction finish. The heavy-traffic topcoat for shops and commercial floors.

What's in the box

• 1/4 Gal Kit, 1 Gal Kit, 4 Gal Kit: Part A + Part B + Part C (aggregate), pre-measured. Mix the whole kit.
• Clear. The clear has an amber tone, so over a colored floor it should be tinted to match the base coat. Tint packs (1 pint per gallon kit) come in white, off white, light gray, medium gray, charcoal gray, tile red, tan, light blue and blue. Call (877) 703-7699 to add one.

What it covers

• About 600 sq ft per gallon kit (about 660 sq ft tinted). Roll it thin. A heavy coat traps solvent.
• 1/4 Gal Kit: about 150 sq ft. 1 Gal Kit: about 600 sq ft, a typical 2-car garage. 4 Gal Kit: about 2,400 sq ft.

Coverage figures assume the recommended thickness on a properly profiled slab. Rough or porous concrete uses more. Order the next size up if your floor is at the top of a range.

Use it when

• Forklifts, hot tires, dragged equipment, constant foot traffic

Pick something else if

• The space is occupied or attached (solvent odor; use T-521 or T-520)
• You want a high-gloss clear (T-322)

Specs

• Solids: 93% wt / 92% vol
• Mix ratio: by weight, 1.08 lb A : 6.45 lb B : 3.0 lb C
• Working time: 1-2 hr (1 gal)
• Tack free (hr): 3-6
• Recoat (hr): 6-10
• Foot traffic: 14-24 hr
• Full cure: 3-5 days
• Apply at (F): 50-90 (RH 50-90%)
• VOC: < 95 g/l

Ventilate during application.

Data sheet available on request. Test a small area first.