T-344 Polyaspartic Coating, Fast Cure

The one-day topcoat: tack free in 1 to 3 hours, walkable in 3 to 5, fully cured in 24 to 48. Usable working time is 5 to 10 minutes. This is an installer product.

What's in the box

• 0.75, 1.5, 3 and 15 Gal Kits, Part A + Part B, 2:1
• Each kit is two parts. Mix Part A into Part B completely before you pour.

What it covers

• 133 to 320 sq ft per gallon at 5 to 12 mils wet
• 1.5 Gal Kit: one car bay

Coverage figures assume the recommended thickness on a properly profiled slab. Rough or porous concrete uses more. Order the next size up if your floor is at the top of a range.

Use it when

• Same-day return to service (commercial, retail, garages where the car must go back in tonight)
• Over a B-933 polyurea chip base

Pick something else if

• DIY: usable working time is 5-10 minutes (use T-444X)
• Thick builds (thin/medium only)
• Without a sample test first (the data sheet insists)

Specs

• Solids: 85% wt / 81% vol
• Mix ratio: 2:1 by volume
• Working time (min): 30-60 to gel; 5-10 usable
• Tack free (hr): 1-3
• Recoat (hr): 2-4
• Foot traffic: 3-5 hr
• Full cure: 24-48 hr
• Apply at (F): 50-90 (RH < 85%)
• VOC: < 159 g/l

Data sheet available on request. Test a small area first.