C-137MLV Chip & Quartz Binder, Low Viscosity

Thin-flowing clear epoxy built to lock in a full chip, quartz or colored-sand broadcast, or to work as a clear primer at 12 mils.

What's in the box

• 0.75, 1.5, 3 and 15 Gal Kits, Part A + Part B, 2:1
• Each kit is two parts. Mix Part A into Part B completely before you pour.

What it covers

• 90 to 133 sq ft per gallon at 12 to 18 mils
• 3 Gal Kit: one car bay

Coverage figures assume the recommended thickness on a properly profiled slab. Rough or porous concrete uses more. Order the next size up if your floor is at the top of a range.

Use it when

• Clear primer under a metallic or clear system
• Binder coat for a full chip or quartz broadcast
• High-build clear (12-18 mils) where C-671's 16-18 mils is more than needed

Pick something else if

• Exposed to UV without a urethane/polyaspartic topcoat (ambers)
• Below 55°F

Specs

• Solids: 96.5% wt / 96% vol
• Mix ratio: 2:1 by volume (8.95 lb A : 4.15 lb B)
• Working time (min): 35-55 (1.5 gal)
• Tack free (hr): 6-8
• Recoat (hr): 10-16
• Foot traffic: 14-18 hr
• Full cure: 2-7 days
• Apply at (F): 55-90
• VOC: < 35 g/l

Data sheet available on request. Test a small area first.