What Does 100% Solids Epoxy Mean?

"Solids" is the part of a coating that is still on the floor after it cures. Everything else is a carrier, usually water or solvent, that evaporates.

A 100% solids epoxy has no carrier. The resin and hardener react and cure into a solid film, and none of it evaporates. In practice that means:

• Thicker coating per coat. You get the full film thickness you apply, so one coat does the work of several thin ones.
• Little to no solvent odor or VOCs. There is no solvent to off-gas while it cures.
• More durable. A thick, dense film resists hot tires, chemicals and abrasion far better than a thin one.

B-707 High Build Epoxy, the base coat in our floor systems, is 100% solids.

Not sure what your slab needs? Call a coating expert at (877) 703-7699, or build your kit and we will size it for you.