Pure Epoxy 3 Gallon Kit, Up To 350 SF

EpoxyPRO EP600 Series is a an industrial grade/food grade, non-porous, chemical and stain resistant, two component 100% solids epoxy coating designed for interior applications where an impact resistant floor is needed. Odorless, ZERO (VOCs) Volatile Organic Compounds produce a non-toxic, high-gloss finish with increased light reflectivity up to 400%.

EpoxyPRO Industrial Grade Epoxy Floor Coating Systems produce an attractive and highly durable floor tough enough for heavy manufacturing or the harshest industrial environments but beautiful enough for your home or office.

TIMING: Ultra Fast coating cure times allow for foot traffic or motorized traffic in 16 to 24 hours.

COVERAGE: our installation tools that are provided allow you to squeegee and roll out this product at approximately 8-20 mils per coat on most smooth concrete floors. Please Note: Actual coatings coverage rate per mils is dependent on the concrete surface porosity. For overly porous concrete more materials may be required. (2A to 1B mix ratio up to 116 SF per Gallon or 350 SF per 3 Gallon Kit)

RECOMMENDATION: for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet or has any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.

Please note the following non-slip recommendation:
Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.

CUSTOM COLORS: are available for an additional cost and a minimum of 15 Gallon order. Please call 877-703-7699 for pricing.

Do-It-Yourself or Professional Installation is Available

Please call us at 877-703-7699 or email us at Sales@EpoxyPro.com 

with any questions or to schedule a free estimate on any

residential, commercial or industrial floor project.

Industrial epoxy floor paint  |  Garage epoxy paint  |  Gountertop epoxy