3 x 55 = 165 Gallon Kit: Epoxy Solids; 2 parts A and 1 part B. Coverage: up to 16,000 sq. ft. on smooth concrete. Colors: Light Gray, Medium Gray, Dark Gray, Light Tan, Medium Tan, or Dark Tan. Custom colors available for additional cost.
EpoxyPRO EP600 Series is a an industrial grade/food grade, two component 100% solids epoxy colored coating designed for interior applications where an impact resistant floor is needed.
TIMING: Ultra Fast coating cure times allow for foot traffic or motorized traffic in 16 to 24 hours. Non porous, chemical and stain resistance. Odorless with ZERO (VOCs) Volatile Organic Compounds produce a non-toxic, high-gloss finish with increased light reflectivity up to 400%.
COVERAGE: our installation tools that are provided allow you to squeegee and roll out this product at approximately 8-20 mils per coat on most smooth concrete floors. Please Note: Actual coatings coverage rate per mils is dependent on the concrete surface porosity. For overly porous concrete more materials may be required.
RECOMMENDATION: for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet or has any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.
Please note the following non-slip recommendation:
Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.
CUSTOM COLORS: are available for an additional cost and a minimum of 15 Gallon order. Please call 877-703-7699 for pricing.