Powder Oxide Non-Slip Additive – Polyurethane Products Only

PRODUCT DESCRIPTION: 

EpoxyPRO Powder (Aluminum) Oxide products consist of coarse crystalline particles that are crushed, graded or screened and then ground to their specific powdered particle size. These high density particles have a high thermal conductivity and good resistance to thermal and mechanical shock. In addition, these particles have a high heat capacity, high electrical capacity and excellent abrasion resistance.

RECOMMENDATION; for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet or has any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.

Please note the following non-slip recommendations:
Aluminum Oxide #46 Grit Broadcast is recommended to be used with: PURE 100% Solids Epoxy or METALLIC 100% Solids Epoxy.

Powder Oxide Additive (only to be used with polyurethane topcoats) is recommended when a POLYURETHANE Topcoat is desired.