Penetrating Deeply into Oil Saturated Concrete to prepare for your floor prior to painting your garage floor
Epoxy PRO Oil Stop Primer for oil saturated concrete is a two component, epoxy undercoating designed to cover petroleum based oil and greases that cannot be removed with a degreaser. In many instances petroleum can penetrate the surface of concrete floors to the extent that the oil may not be removed by surface cleaning. If untreated, this oil may migrate back to the surface to cause a delamination. Our Garage Floor Oil Stop Primer for oil saturated concrete mixes with the oil in the surface, penetrating deeply to lock in contamination leaving a clean surface prior to painting your garage floor with epoxy garage floor paint.
Epoxy PRO Oil Stop Primer is suited as a primer for most epoxy-based products where petroleum oil based contamination cannot be fully removed using degreasers or floor etching solutions. These applications include the following:
|Chemical Storage Areas
||Chemical Processing Areas
||Fork Lift Areas
||Health Care Facilities
||Law Enforcement Facilities
|Meat Preparation Areas
||Nuclear Plant Floors
||Oil Storage and Processing Facilities
|Photography Processing Areas
|Produce Preparation Areas
|Secondary Containment Structures
ADVANTAGES of Epoxy PRO Oil Stop Primer
Provides for proper bonds adhesion for petroleum based oil stains
Concrete should be thoroughly degreased and solvent washed to remove as much oil as possible.
Temperature of concrete must be 60°F or above at time of mixing. Stir each component separately before blending. Pour Part A into a clean container and add Part B Stir for three minutes with a low speed electric drill motor equipped with a mixing paddle. Immediately begin application.
Epoxy PRO Oil Stop Primer can be applied with brush, or 3/8" nap roller. Apply Epoxy PRO Oil Stop Primer at a rate of 250-300 square feet per gallon.
Epoxy PRO Oil Stop Primer - for oil saturated concrete - will normally be ready to recoat in 8-10 hours. Top-coating before 8 hours can cause some slight bleeding of the EpoxyPRO Oil Stop Primer into the topcoat. For best results wait 16-24 hours before applying Epoxy PRO.
Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
Proper mixing and installation is critical to the optimal success of all product. See Articles and Resources at EpoxyPRO.com for more details on our products. Be sure to contact us with any questions and/or concerns that you have at email@example.com or calling 877-77-EPOXY.
Unless otherwise agreed upon in writing, buyer is responsible for the cost of shipping. Also, due to orders being customized for each customer, returns are not permitted unless otherwise agreed upon in writing.