Aluminum Oxide #46 Grit Broadcast

    From: $19.95

    From: $19.95
    EpoxyPRO Aluminum Oxide Broadcast. Select the amount below of fine grain sand non-slip aggregate broadcast.
    RECOMMENDED: Aluminum Oxide #46 Grit Non-Slip Broadcast
    Clear

      PRODUCT DESCRIPTION: 

      EpoxyPRO Powder (Aluminum) Oxide products are high density, coarse crystalline particles that are crushed, graded or screened and then ground to their specific powdered particle size.  These particles have a high thermal conductivity and good resistance to thermal and mechanical shock. In addition, these particles have a high heat capacity, high electrical capacity and excellent abrasion resistance.

      EpoxyPRO Powder Oxide (403U) is recommended for use with EpoxyPRO High Wear Polyurethane System.

      EpoxyPRO #46 Grit Aluminum Oxide (632F) is recommended for use with our 100% Solids Epoxy System.

      RECOMMENDATIONS; for your safety and for that of others please keep in mind that many types of floor finishes may be slippery when wet or has any inconspicuous foreign substances that may create a potential slip hazard. Keeping floors clean and dry is recommended.

      MSDS download >

      Weight

      3.5 lbs $19.95 500 sq ft, 10 lbs $64.95 1500 sq ft, 25 lbs $149.95 3600sq ft
      Accessibility